在建筑工地施工现场中，必要要安装临边防护栏，以防止落物伤人或施工人员在工作时因意外坠落而造成事故。在临边护栏的生产和安装过程中，需要达到很多的要求才能保证其起到相应的作用，下面我们一起来看临边护栏生产以及安装要求。

In the construction site of the construction site, it is necessary to install the edge guard to prevent falling objects from hurting people or the construction personnel from causing safety accidents due to accidental fall during work. In the production and installation process of edge guardrails, many requirements need to be met to ensure that they play a corresponding role. Let's look at the production and installation requirements of edge guardrails.

临边护栏生产要求：

Production requirements for edge guardrails:

临边护栏需要使用的原材料为钢管，经过焊接生产加工而成，钢管的表面应平直光滑，不硬出现裂痕、分层、毛刺、结疤、压痕、错位、硬弯及深划痕等产品质量问题。

The raw material used for the edge fence is high-quality steel pipe, which is welded, produced and processed. The surface of the steel pipe should be straight and smooth, and there should be no crack, delamination, burr, scar, indentation, dislocation, hard bend, deep scratch and other product quality problems.

原材料钢管在投入生产前需要对其壁厚警醒抽查检验，为了保证符合生产要求，抽检比例不得低于30%，对于壁厚下差超过10%的钢管不可投入生产。如在抽查钢管的过程中，发现不合格比例高于30%时应加大抽查力度。

The wall thickness of raw steel pipes needs to be vigilant and spot checked before they are put into production. In order to ensure that they meet the production requirements, the sampling proportion shall not be less than 30%. Steel pipes with a wall thickness difference of more than 10% cannot be put into production. For example, in the process of spot check of steel pipes, if the unqualified proportion is found to be higher than 30%, the spot check shall be strengthened.

为了保证临边护栏的使用寿命以及防腐性能，钢管以及扣件的表面必须进行防锈处理。

In order to ensure the service life and anti-corrosion performance of edge guardrails, the surface of steel pipes and fasteners must be treated with rust prevention.

扣件在使用前要进行检查筛选，不可以出现变形、裂痕的情况，螺栓不可出现划丝。

The fasteners shall be checked and screened before use, and there shall be no deformation and cracks, and the bolts shall not be scratched.

临边护栏安装要求：

Installation requirements of edge guardrail:

在工地施工现场中，工作人员进场必须佩戴帽，临边护栏施工现场堆放材料需按平面布置图要求归位，临边护栏的各个工作点都需要设置有针对性的警示标识，施工现场要制定抽水措施，防止出现积水造成事故。

In the construction site, the staff must wear safety helmets when entering the construction site. The materials stacked on the construction site of the edge guardrail should be put back in place according to the requirements of the layout plan. Targeted safety warning signs should be set at all work points of the edge guardrail. Pumping measures should be developed on the construction site to prevent water accumulation from causing safety accidents.

临边护栏的高度要高于1.2米，宽度1.5-2m，底部需要设置踢脚板，高度15-20cm。在外部需加挂网，并设置有针对性的警示标识。

The height of the edge guardrail should be higher than 1.2m, and the width should be 1.5-2m. A skirting board should be set at the bottom, with a height of 15-20cm. Safety nets shall be hung externally and targeted safety warning signs shall be set.

在安装时一定要保证网片和立柱链接牢靠，网面安装需平整，无明显翘曲和凹凸现象。

During installation, ensure that the mesh and column are firmly connected, and the mesh surface installation needs to be flat without obvious warpage and concave convex phenomenon.

临边护栏生产以及安装要求详解内容就到这里了，希望给您好的帮助，当然您在购买时候也要提前做好准备，购买到好的产品，更多事项就来网站http://www.jnpfjc.com咨询吧！

That's all for the detailed explanation of the production and installation requirements of the edge guardrail. I hope you can help me. Of course, you should be prepared in advance when you buy a good product. If you buy a good product, please come to the website for more information http://www.jnpfjc.com Consult!