木工加工棚灭火器配置什么标准?
木工加工棚防火管理规定
Regulations on fire prevention management of woodworking shed
1、木工棚内严禁吸烟。
1. Smoking is strictly prohibited in the carpentry shed.
2、木工棚内要设置一组灭火器,并放在比较明显的部位,任何人不得挪用。
2. A group of fire extinguishers shall be set in the carpentry shed and placed in obvious parts, which shall not be misappropriated by anyone.
3、木工操作员要经常打扫木工棚,对刨花、木屑及时清理。
3. Woodworking operators shall often clean the wood shed and clean the shavings and sawdust in time.
4、木工要经常检查使用的机械的电气线路,检查是否有发热、短路、打火现象,如发现有此现象,应及时汇报,处理避免发生火灾。
4. Woodworkers should often check the electrical circuit of the machinery used to check whether there is heating, short circuit and ignition. If this phenomenon is found, it should be reported in time and handled to avoid fire.
5、木工在下班前要锁好电闸箱。
5. The carpenter should lock the switch box before leaving work.
6、加工好的成品、半成品木材要放在指定的位置,不得随意乱扔乱放。
6. The processed finished and semi-finished wood shall be placed in the designated position and shall not be thrown or placed randomly.
7、木工区的负责人对本区的防火工作要认真负起责任,严格执行消防法规,发现可疑的情况及时排除,努力把消防的不隐患消灭在萌芽状态中。
7. The person in charge of the woodworking area shall seriously take responsibility for the fire prevention work in the area, strictly implement the fire control regulations, eliminate suspicious situations in time, and strive to eliminate the unsafe hidden dangers of fire control in the bud.
- 上一篇:马路临边护栏有哪些隐患?
- 下一篇:怎样搭简易木棚?