钢筋加工棚是施工现场内对钢筋进行拉直、弯曲、焊接等钢筋加工作业的一个场地，是工地施工标准化的重要组成部分。钢筋加工棚不仅是进行施工的重要保障，也是保护工地施工人员的基石。

The steel bar processing shed is a site for straightening, bending, welding and other steel bar processing operations on the construction site, and is an important component of standardized construction on the construction site. The steel processing shed is not only an important guarantee for safe construction, but also the cornerstone for protecting the safety of construction personnel on the construction site.

钢筋加工棚一般需要根据施工计划来安置钢筋对焊机、切断机、弯曲机、调直机......等设备的数量及加工流水线等条件来确定尺寸；一般情况有长宽尺寸6*9m、6*12m、9*12m等几种，高度在3.6-4m之间。

The steel bar processing shed generally needs to install steel bar welding machines, cutting machines, bending machines, straightening machines, etc. according to the construction plan Determine the size based on the quantity of equipment and processing line conditions; Generally, there are several dimensions such as length and width of 6 * 9m, 6 * 12m, and 9 * 12m, with heights ranging from 3.6-4m.

也可以根据实际情况自行设计钢筋加工棚的长宽尺寸。

You can also design the length and width dimensions of the steel processing shed according to the actual situation.

款式可分为：

The styles can be divided into:

标准化工地钢筋加工棚特点：

Characteristics of standardized steel bar processing shed:

1. 构件组装而成，采用封闭式防护，防护性能高，双层防护，有效缓冲高空坠物的冲击力；

1. Assembled from components, using enclosed protection, with high safety protection performance, double-layer protection, effectively buffering the impact force of high-altitude falling objects;

2. 采用国标钢材制作，坚固牢靠、经久耐用；

2. Made of national standard steel, sturdy, reliable, and durable;

3. 全自动高温烤漆，颜色鲜艳，不易褪色；

3. Fully automatic high-temperature baking paint, with bright colors and not easy to fade;

4. 拼装式，快速组装，拆卸简单，方便运输；

4. Assembly type, quick assembly, simple disassembly, and convenient transportation;

5. 款式、颜色、尺寸可根据客户要求定制；

5. The style, color, and size can be customized according to customer requirements;

6.  地面需要硬化，立柱基础浇筑700*700*700mm混凝土，预埋300*300*12mm；

6. The ground needs to be hardened, and the column foundation should be poured with 700 * 700 * 700mm concrete and embedded with 300 * 300 * 12mm;

7. 各种型材及配件规格可按工地所在地的安防标准定制。

7. Various profiles and accessory specifications can be customized according to the security standards of the construction site.

钢筋加工棚标准：

Standard for steel bar processing shed:

1. 一般情况下，钢筋加工棚都在塔吊的吊运范围内的，否则钢筋吊动不方便啊；

In general, the steel bar processing shed is within the lifting range of the tower crane, otherwise it is inconvenient to lift the steel bars;

2. 防护棚的顶有二层的，上面的隔层上铺木板，下面一层铺二层竹芭片子/楼层板/彩钢板等。二层之间间距500 mm。顶面有500高度的围护。以双钢管为立柱搭设的；

2. The top of the protective shed has two layers, with wooden boards on the upper partition and two layers of bamboo sheets/floor boards/color steel plates on the lower layer. The spacing between the second floor is 500 mm. There is a 500 height enclosure on the top surface. Erected with double steel pipes as columns;

3. 内部有灭火器、钢筋加工设备、有照明系统；

3. There are fire extinguishers, steel processing equipment, and lighting systems inside;

4. 门口有铭牌、机械旁边有操作规程、注意事项。

4. There is a nameplate at the entrance, and there are operating procedures and precautions next to the machinery.

本文由钢筋加工棚友情奉献.更多有关的知识请点击:http://www.jnpfjc.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待

This article is dedicated by the steel bar processing shed. For more related knowledge, please click: http://www.jnpfjc.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned