在围挡施工完毕的时候可能会发现有些方面出错了，比如位置不是很准确等等，当这种情况发生的时候我们应该怎么办呢？做什么能够补救回来呢？

　　When the enclosure construction is completed, it may be found that some aspects are wrong, such as the position is not very accurate and so on. When this happens, what should we do? What can be done to remedy it?

　　围挡厂家让认为可以通过调节内六角螺丝，斜拉杆侧面的内六角螺丝，以达到校正框扇的搭接量不合适的目的。工地围挡安装时窗框倾斜，发生的原因是安装时没用线坠和靠尺检查窗的垂直度，对于这种大意造成的错误一定要避免。

　　Enclosure manufacturers think that by adjusting the hexagon screws, oblique pull rod side hexagon screws, in order to achieve the purpose of correcting the lap amount of the frame fan is not appropriate. Site enclosure installation window frame tilt, the cause of the occurrence is the installation of no line pendant and by ruler inspection window verticality, for this kind of carelessness caused by the mistake must be avoided.

　　玻璃垫片位移或者位置不对而使窗扇因为玻璃重力发生变形，的方法是依据科学的垫片放置方法重新正确安装工地围挡。窗扇变形有时也是一些外力破坏所致，因为安装而造成的变形要重新安装，并严格按照说明书规定的方法和标准正确操作。

　　The displacement or position of the glass gasket is not correct so that the window sash is deformed due to the glass gravity. The solution is to install the site enclosure correctly according to the scientific placement method of the gasket. Window sash deformation is sometimes caused by the destruction of some external forces, because of the installation of the deformation caused by re-installation, and in strict accordance with the specification of the method and standard correct operation.

　　框扇对角线偏差太大，远远的超过允许偏差，这主要是下料或者焊接造成的偏差。出现这种情况人为的调节作用不大，需切割工地围挡重做。工地围挡是所用五金件的机械力学性能达不到窗的要求，门窗使用劣质五金件后。容易出现。

　　The diagonal deviation of the frame fan is too large, far beyond the allowable deviation, which is mainly caused by blanking or welding. In this case, artificial adjustment effect is not big, need to cut the site enclosure to do again. Site enclosure is to use the mechanical mechanical properties of hardware does not reach the requirement of the window, after door window uses inferior hardware. Easy to appear.

　　现在工程围挡的重复利用也是可以进行的，这样我们调整的工程围挡就重新有了用武之地了，而不是一旦建设完成就必须拆掉，这样既浪费材料成本，又对环境造成了污染。并且工程围挡对于行人车辆、人员财产起到保护作用，对于防尘降噪、美化城市也是发挥了积极作用。

　　Now the reuse of the project enclosure can also be carried out, so that we adjust the project enclosure will be used again, rather than once the completion of the construction must be removed, which is a waste of material costs, and caused pollution to the environment. And the project enclosure plays a protective role in the safety of pedestrians and vehicles, personnel and property, and also plays a positive role in dustproof noise reduction and beautification of the city.

　　围挡安装出错之后怎么进行补救？以上问题的相关解答了，如果您在使用期间发现了新的问题出现且找不到原因的话，可以来网站www.jnpfjc.com进行咨询交流。

　　After the installation of enclosure error how to remedy? The above questions are answered. If you find a new problem during use and can not find the reason, you can come to the website www.jnpfjc.com for consultation and communication.