As the main material of building construction, most of the reinforcement needs to be processed on the construction site, and the operators have a relatively long working time on the construction site. In order to improve the operating environment, the reinforcement processing shed came into being. The reinforcement processing shed is the site for straightening, bending, welding and other reinforcement processing operations on the construction site.

现场钢筋加工棚一般需根据施工组织计划，安置钢筋对焊机、切断机、弯曲机、调直机等设备的数量及加工流水线；另还需考虑部分钢筋原材料、加工后钢筋的周转及堆放；现场施工场地、用电等条件来确定。

The on-site reinforcement processing shed generally needs to place the number of reinforcement butt welding machines, cutting machines, bending machines, straightening machines and other equipment and processing lines according to the construction organization plan; In addition, the turnover and stacking of some reinforcement raw materials and processed reinforcement shall be considered; Site construction site, power consumption and other conditions.

哪些场所必须搭建加工棚

Which places must build processing sheds

1.施工现场所有钢筋加工场均需设置加工棚，

1. All reinforcement processing yards on the construction site shall be provided with processing sheds,

2.所有露天放置的施工设备均应搭设防护棚，如木工加工、小型机械、搅拌机、砂浆机等。

2. All construction equipment placed in the open air shall be provided with safety protection sheds, such as woodworking, small machinery, mixer, mortar machine, etc.

3.在建筑物坠落半径内或塔吊覆盖范围内的加工棚需要设置双层硬质防护。

3. The processing shed within the falling radius of the building or within the coverage of the tower crane needs to be provided with double-layer hard protection.

钢筋加工棚搭建要求

Construction requirements of reinforcement processing shed

1.工具式钢筋加工棚搭设具体尺寸根据现场实际情况确定。

1. The specific size of tool type reinforcement processing shed shall be determined according to the actual situation on site.

2.搭设在塔吊回转半径和建筑物周边的加工车间必须设置双层硬质防护。

2. The processing workshop set up around the slewing radius of the tower crane and the building must be provided with double-layer hard protection.

3.加工区地面需硬化，宜选用混凝土地面。

3. The ground of the processing area needs to be hardened, and the concrete ground should be selected.

4.加工区顶部应张挂警示标识和宣传用语的横幅，横幅宽度宜为1米。

4. Safety warning signs and banners of safety propaganda words shall be hung on the top of the processing area, and the width of the banner should be 1m.

5.工具式钢筋加工棚需在醒目处挂操作规程图牌，图牌的尺寸为：宽×高=2m×1mm。

5. The tool type reinforcement processing shed shall hang the operation specification drawing board at an eye-catching place, and the size of the drawing board is: width × Height = 2m × 1mm。

6.各种型材及构配件规格为参考值，具体规格应根据当地风荷载、雪荷载进行核算。

6. The specifications of various profiles and components and fittings are reference values, and the specific specifications shall be calculated according to the local wind load and snow load.

7.南方地区，如遇台风应采取防风措施，可设置缆风绳。

7. In case of typhoon in southern China, windproof measures shall be taken, and wind ropes can be set.