The steel bar shed, also known as the protective shed, plays an indispensable protective role in construction sites. When setting up the steel bar shed, it is important to pay attention to several points:

1. 工具式钢筋加工棚搭设具体尺寸根据现场实际情况确定。

1. The specific size of the tool type steel bar processing shed shall be determined based on the actual situation on site.

2. 搭设在塔吊回转半径和建筑物周边的加工车间设置双层硬质防护。

2. Double layer hard protection shall be installed in the processing workshop located around the turning radius of the tower crane and the building.

3. 加工车间地面需硬化，宜选用砼地面。

3. The ground of the processing workshop needs to be hardened, and concrete ground should be selected.

4. 加工车间顶部应张挂警示标识和宣传用语的 横幅，横幅宽度宜为1m。

4. Safety warning signs and safety propaganda slogans should be hung on the top of the processing workshop, with a width of 1m.

5. 工具式钢筋加工棚需在醒目处挂操作规程图牌，图牌 的尺寸为：宽×高=2000mm×1000mm。

5. The tool type steel bar processing shed should be prominently hung with an operating procedure diagram board, with a size of: wide × Height=2000mm × 1000mm。

6. 各种型材及构配件规格为参考值，具体规格应根据当 地风荷载、雪荷载进行核算。

6. The specifications of various profiles and components are reference values, and the specific specifications should be calculated based on local wind and snow loads.

7. 南方地区，如遇台风应采取防风措施，可设置缆风绳。

7. In the southern region, if encountering a typhoon, wind prevention measures should be taken and cable ropes can be set up.

施工现场所有钢筋加工场均需设置钢筋棚，所有露天放置的施工设备均应搭设钢筋棚，如搅拌机、砂浆机、输送泵：在建筑物坠落半径内或塔吊覆盖范围内的钢筋棚需 要设置双层防护;

All steel bar processing yards on the construction site need to be equipped with steel bar sheds, and all construction equipment placed in the open air should be equipped with safety steel bar sheds, such as mixers, mortar machines, and delivery pumps. Steel bar sheds within the falling radius of buildings or within the coverage range of tower cranes need to be equipped with double layer protection;

钢筋棚立柱采用方钢或圆钢制作，刷建工蓝油漆，钢筋棚两侧应设置八字撑，并满挂密目网，所有水平杆控制伸出立杆外侧100mm;

The columns of the steel reinforcement shed shall be made of square or round steel, painted with construction blue paint. On both sides of the steel reinforcement shed, octagonal braces shall be set up, and dense safety nets shall be fully hung. All horizontal rods shall extend 100mm beyond the outer side of the upright rods;

本文由钢筋加工棚制作整理发布，您是不是对这些内容有所了解了呢?更多的内容请点击：http://www.jnpfjc.com我们会有更多精彩内容等你查看。

This article is produced, organized, and published by the steel bar processing shed. Do you have any understanding of these contents? For more information, please click on: http://www.jnpfjc.com We will have more exciting content waiting for you to check out.