为了满足当前施工现场布置的要求，满足文明施工的需要，需要在施工现场搭建各种各样的木工加工棚，同时为了便于拆卸和运输，提高周转频率，充分体现减排的效果，我们在施工现场搭建的时候，需要掌握一些方法和要求。

In order to meet the requirements of the current construction site layout and the needs of civilized construction, we need to build various woodworking sheds on the construction site. In order to facilitate disassembly and transportation, improve the turnover frequency, and fully reflect the effect of energy conservation and emission reduction, we need to master some methods and requirements when building on the construction site.

1、结构构件的强度满足使用的要求

1. The strength of structural members shall meet the requirements of safe use

钢柱采用100mm100mm6mm方钢，上部承重结构采用桁架式钢梁，梁杆件，采用D573mm，翼板与基础连接部分采用10mm厚钢板。螺栓为直径12毫米的高强度螺栓，柱脚为直径18毫米的高强度螺栓。

The steel column is made of 100mm100mm6mm square steel, the upper load-bearing structure is made of truss steel beams, the beam members are D573mm, and the connection between the wing plate and the foundation is made of 10mm thick steel plates. The bolts are high-strength bolts with a diameter of 12 mm and the column bases are high-strength bolts with a diameter of 18 mm.

2、整体性好，整体强度高

2. Good integrity, high overall strength

连接采用高强度螺栓，安装后整体稳定性好，抗风荷载和顶部荷载能力强，与地面固定牢固，振动冲击小，强度高。

High strength bolts are used for connection. After installation, it has good overall stability, strong wind load resistance and top load resistance, and is firmly fixed to the ground with low vibration impact and high strength.

3、节点少，安装方便

3. Few nodes, convenient installation

与传统扣件式脚手架相比，连接节点少，高强螺栓强度高，安装操作方便。

Compared with the traditional fastener scaffold, it has fewer connecting nodes, high strength bolts and convenient installation and operation.

标准化：符合生产标准化的要求。标准化的装配安装、配色、结构可靠性能均满足标准化要求。从现场实际安装使用效果来看，视觉质量已经达到并能充分展示标准化，效果非常好。

Standardization: meet the requirements of production standardization. The standardized assembly, installation, color matching and structural reliability meet the standardized requirements. From the actual installation and use effect on site, the visual quality has reached and can fully display standardization, and the effect is very good.

标准化：产品的工厂化、定型化、标准化能充分展示它的标准化，满足防护的基本要求，体现使用方便、布局整齐、美观的特点。

Standardization: the industrialization, finalization and standardization of products can fully demonstrate its standardization, meet the basic requirements of protection, and reflect the characteristics of convenient use, neat layout and beautiful appearance.

施工现场搭建加工棚的特点要求相关的内容介绍完毕，您有什么想法吗？可以随时来我们网站进行http://www.jnpfjc.com咨询！

After the introduction of the characteristics and requirements of the processing shed on the construction site, do you have any ideas? You can come to our website anytime http://www.jnpfjc.com consulting service