木工加工棚一般需根据施工计划，安置钢筋对焊机、切断机、弯曲机、调直机等设备的数量及加工流水线；另还需考虑部分钢筋原材料、加工后钢筋的周转及堆放；现场施工场地、用电等条件来确定。木工加工棚的搭设还要注意几点：

Generally, the woodworking shed shall be equipped with the number and processing lines of steel butt welding machines, cutting machines, bending machines, straightening machines and other equipment according to the construction plan; In addition, it is also necessary to consider the turnover and stacking of some reinforcement raw materials and processed reinforcement; The site construction site, electricity and other conditions shall be determined. Several points should be paid attention to when setting up the woodworking shed:

木工加工棚的搭设还要注意一下几点：

The following points should also be paid attention to when setting up the woodworking shed:

1.工具式木工加工棚搭设具体尺寸根据现场实际情况确定。

1. The specific size of the tool type woodworking shed shall be determined according to the actual situation on site.

2.搭设在塔吊回转半径和建筑物周边的加工车间设置双层硬质防护。

2. The processing workshop set up at the slewing radius of the tower crane and around the building shall be provided with double-layer hard protection.

3.加工车间地面需硬化，宜选用砼地面。

3. The ground of the processing workshop should be hardened, and the concrete ground should be selected.

4.加工车间顶部应张挂警示标识和宣传用语的横幅，横幅宽度宜为1m。

4. The top of the processing workshop shall be hung with warning signs and banners of advertising language, which should be 1m wide.

5.工具式钢筋加工棚需在醒目处挂操作规程图牌，图牌的尺寸为：宽×高=2000mm×1000mm。

5. Tool type reinforcement processing shed shall be hung with operation instruction board at a conspicuous place. The size of the board is: width × Height=2000mm × 1000mm。

6.各种型材及构配件规格为参考值，具体规格应根据当地风荷载、雪荷载进行核算。

6. The specifications of various profiles and components are reference values, and the specific specifications shall be calculated according to the local wind load and snow load.

7.南方地区，如遇台风应采取防风措施，可设置缆风绳。

7. In the south, in case of typhoon, windproof measures should be taken, and wind ropes can be set.

以上几点就是问题的相关解答了，希望能够帮助到您，您对此有什么想法可以随时来我们网站http://www.jnpfjc.com咨询吧！

The above points are the answers to your questions. I hope they can help you. If you have any ideas, please come to our website at any time http://www.jnpfjc.com Consult!