加工棚是建筑施工过程中操作人员或人行的必经通道，过往人员的加工棚为双层。从悬挑脚手架的悬挑处开始，每隔十米设置一个悬挑式加工棚，可以更好地保证加工棚下行走人员的。下面就针对木工加工棚的使用就来讲讲吧。

The processing shed is a necessary passage for operators or pedestrians during the construction process. The processing shed for passing personnel is double-layer. Starting from the cantilevered part of the cantilevered scaffold, a cantilevered processing shed is set every ten meters, which can better ensure the safety of people walking under the processing shed. Let's talk about the use of woodworking shed.

在施工过程中，在搭建加工棚时注意防护措施，施工人员按照施工要求进行施工，露天搅拌机位置、现场混凝土搅拌机、卷扬机棚、钢筋棚、木棚、部分出入口和现场厕所需要设置木工加工棚。

During the construction process, pay attention to protective measures when setting up the processing shed. The construction personnel shall carry out construction according to the construction requirements. Woodworking processing shed shall be set at the location of the open-air mixer, the site concrete mixer, the hoist shed, the steel bar shed, the wood shed, some entrances and exits and the site toilet.

水平保护安装和拆除前，进行技术交底。高空作业人员经过技术培训和考试，并持证上岗。加工棚使用的钢管、扣件等材料符合JGJ130-2011《建筑施工扣件式钢管脚手架技术规范》及相关标准的要求。

Safety technical disclosure shall be conducted before installation and removal of horizontal protection. Operators working at heights shall receive professional technical training and professional examination and take up their posts with certificates. The steel pipes, fasteners and other materials used in the processing shed meet the requirements of jgj130-2011 technical code for safety of steel tubular scaffold with fasteners in building construction and relevant standards.

安装和拆除水平加工棚时，操作人员的“三宝”齐全并正确使用。加工棚搭设和拆除时，应避免上下同时作业，错开作业时间。安装和拆除加工棚时，所有材料和工具应堆放在建筑物外缘少2m处，堆放高度不得超过1m。

When installing and removing the horizontal processing shed, the "three safety treasures" of the operators shall be complete and correctly used. During the erection and dismantling of the processing shed, it shall be avoided to operate up and down at the same time and stagger the operation time. When installing and removing the processing shed, all materials and tools shall be stacked at least 2m away from the outer edge of the building, and the stacking height shall not exceed 1m.

建造和拆除加工棚时，应在地面上设置警戒区，并派专人监控。建造和拆除加工棚时，应指定专人指挥。管理人员应注意眼、腿、口，采取有效的防护措施应对危险情况，确保人员。

During the construction and demolition of the processing shed, a warning area shall be set on the ground and a special person shall be assigned to monitor it. When constructing and dismantling the processing shed, a special person shall be appointed to command. The management personnel shall pay attention to the eyes, legs and mouth, take effective safety protection measures to deal with dangerous situations and ensure personnel safety.

在雨天和大风天气，应暂停加工棚的搭设和拆除，并检查和维护加工棚的质量。加工棚搭设完成后，经专职员验收合格后方可投入使用。在搭设和拆除水平防护前，进行技术交底。

In rainy and windy weather, the erection and removal of processing shed shall be suspended, and the quality of processing shed shall be inspected and maintained. After the erection of the processing shed is completed, it can only be put into use after being accepted by the full-time safety officer. Before setting up and removing horizontal protection, safety technical disclosure shall be conducted.

从中我们了解到在安装加工棚的时候一定注意施工，施工人员按照施工要求进行施工，同时还要保证搭建质量，这样才能实现保护的作用，这样才能达到我们搭建的目的。更多相关内容就来我们网站http://www.jnpfjc.com咨询了解吧。

From this, we learned that when installing the processing shed, we must pay attention to construction safety. The construction personnel must carry out construction according to the construction requirements, and at the same time, we must ensure the construction quality. Only in this way can we achieve the protection function and achieve our goal of building. For more information, please visit our website http://www.jnpfjc.com Consult and understand.